What size hockey gloves do I need?

Measure around the palm of your dominant hand, then compare that measurement with the maker's size chart. Gloves should feel loose over the fingers, reach the bottom of the elbow pad, and allow you to grip a stick without pinching.

Hockey stick, puck, helmet and skates beside a rink

Last updated

  • Bring your stick to the shop and test the grip.
  • Check that the cuff overlaps the elbow pad.
  • Youth and adult charts are not interchangeable.

Step 1: Measure hand length before you read a chart

Measure the player's hand with a flexible tape. Bauer's glove chart asks for the distance from the tip of the middle finger to the wrist crease. That hand length is the number most charts compare with a size row. Note it in inches or centimetres and keep it with the registration file, because you will use it again when the next pair wears out.

Step 2: Check whether the maker doubles the measurement

Not every chart uses the same distance. HockeyStickMan's size guide measures from the tip of the middle finger to the base of the palm, then doubles the result to reach the glove size. A chart built on that method expects a hand length about half the printed size. Bauer's chart uses the full finger-to-wrist-crease length instead. Read the instruction line above the table first, because switching methods can move a player up or down a size.

Step 3: Match the cuff to the elbow pad

Hockey Canada's equipment guidance says gloves should fit like loose winter gloves over the fingers. It also says the top of the glove should extend up the forearm to the bottom of the elbow pad, so the forearm stays covered when the arm bends. Take the elbow pads to the fitting and check the overlap with the arm bent and straight. A glove that leaves a strip of bare forearm is too short, even if the hand measurement looks right.

Step 4: Choose a fit family, then test the grip

Glove families change how the same size feels. Warrior describes its Alpha as a hybrid with more volume than the Covert, the Covert as a tapered design that sits close to the hand, and the Franchise as a classic four-roll fit with more room. Put each shape on with your stick in hand. The fingers should curl around the knob without the palm bunching, and the tips should not press flat against the end of the glove.

Cuff shape matters too: Warrior lists open and tapered cuffs as options for wrist mobility. Tape the knob the way the player tapes it for games, then grip and release a few times. A glove that feels fine on the shelf can rotate around the stick once the hand is warm and the palm is damp.

Step 5: Replace gloves when the protection breaks down

Warrior's guide says to replace gloves when the padding compresses or the palms tear. Start with the palm, because a thin or split palm lets the stick rub directly on the hand. Then press the foam across the back of the fingers and along the cuff; soft, collapsed spots mean the protection is spent. A torn liner or a split cuff roll is another reason to retire the pair.

Children often outgrow gloves before the foam fails. With the glove on and the hand closed, check whether the fingertips reach the end. Then look at the gap between cuff and elbow pad. If either check fails, move up a size even when the label suggests the current pair still fits.

Frequently asked questions

Should hockey gloves fit tight or loose?

Loose enough to move the fingers, not loose enough to twist on the stick. Hockey Canada compares the fit to loose winter gloves over the fingers, and it wants the top of the glove to reach the bottom of the elbow pad. If the glove slides around when you squeeze the stick, try a smaller size or a snugger fit family.

Do I measure my hand or my old gloves?

Measure the hand. Old gloves stretch, and the size printed inside may follow a different brand's scale, so a worn pair is an unreliable ruler. Use the middle finger to wrist crease measurement from Bauer or the doubled finger-to-palm measurement from HockeyStickMan, then compare with the chart for the model you are buying.

Are youth and adult glove sizes interchangeable?

No. Bauer splits its glove chart into youth, junior, intermediate and senior rows, and the measurement ranges behind those rows do not line up with each other. A child who measures into a junior row should not be put in a small senior glove just because the label sounds similar. Always use the maker's row for that age band.

How do I know if a hockey glove is too small?

Three checks: the fingertips hit the end of the glove, the cuff leaves a gap below the elbow pad, and the hand cannot close fully around the stick. Any one of those means the glove is too small, even if the hand measurement matches the size. Hockey Canada's fit rules put padding coverage ahead of the number on the label.

Sources

  1. cdn.hockeycanada.ca
  2. Bauer - Gloves Size Chart
  3. HockeyStickMan - Hockey Glove Size Guide
  4. Warrior - Hockey Gloves Explained
Open Next Play